Livorno 3-seater corner sofa, right-hand facing, in light beige velvet (Bluvel 22), 240x158 cm

158cm x 240cm x 82cm (length x width x height)

Collection: Livorno Color: Light beige Material: Velvet Fabric: Bluvel 22 Abrasion resistance (Martindale): 100000 Fabric composition: This is a synthetic fabric that mimics velvet with a delicate sheen. It is the perfect choice for elegant furniture designs. It has excellent abrasion resistance, which significantly reduces the risk of damage (Martindale test 50,000, 320 g/m²). The material is extremely soft and silky to the touch. The fabric has passed the cigarette test, meaning the upholstery system is resistant to smoldering and ignition and meets the PN-EN 1021-1:2014-12 standard. Care instructions: Furniture upholstered in velvet should be cleaned every one to two weeks. Gently brush the fabric in one direction using a soft brush or sponge. This removes dust and dirt without allowing them to penetrate deeper into the fabric. Brushing also lifts the pile and prevents the so-called "crushing" effect, which is the flattening of fibers in areas where you sit or lean most often. The velvet upholstery should be thoroughly refreshed once or twice a year. Gently wipe the entire fabric with a damp solution of a neutral detergent, such as dish soap and water. Afterwards, wipe with a clean, damp sponge or cloth to remove any detergent residue. Allow the fabric to air dry. You can also use special upholstery cleaners for fabrics, such as foam, shampoo, or spray. Always follow the manufacturer's instructions. In case of stains or spills, gently blot the liquid with a dry cloth or paper towel. To remove dirt from mud, ketchup, mayonnaise, yogurt, or lipstick, carefully pick up the remnants of the substance. To clean the sofa, use mild, neutral detergents such as dish soap or mild soap mixed with lukewarm water in a ratio of one teaspoon of detergent to two cups of water. Strong cleaners and bleach can damage the upholstery. To avoid this, test the cleaner on an inconspicuous area of the furniture and wait 15 minutes. Vacuum the fabric carefully before wet cleaning to remove surface dirt so that it does not penetrate deeper into the material. Clean the soiled area slowly and gently with circular motions from the outer edge of the stain toward the center, attempting to lift the dirt out from between the fibers. Avoid vigorous and strong rubbing to prevent damaging the velvet's pile. Repeat the cleaning process if necessary, expanding the cleaned area around the stain. Apply the cleaning solution in thin layers and remove excess solution immediately. If too much cleaning solution soaks into the fabric, it can become stiff. After cleaning, wipe the treated area thoroughly with a clean, damp cloth to remove the cleaning solution and prevent water stains. Do not use hot water to remove stains, especially organic ones, as this can cause the stains to set. After removing the stain, let the fabric air dry at room temperature. Do not use a hairdryer or any other direct heat source. Do not sit on the sofa during this time, as the upholstery may become misshapen. Seat padding: Polyurethane foam 30 kg/m³ + wadding 200 g/m² Back padding: 70% silicone, 30% foam Structure / Components: Solid pine frame, chipboard, fiberboard, plywood, springs, black plastic feet Color (legs): Black plastic Material (legs): Plastic Number of legs: 10 Leg height (cm): 2.5 Assembly of legs: Feet mounted Number of seats: 3 Length (cm): 240 Width (cm): 158 Height (cm): 82 Seat width (cm): 180 Seat depth (cm): 68 Seat height (cm): 43 Backrest height (cm): 38 Armrest width (cm): 29 Armrest height (cm): 59 Maximum load (kg): 350 Weight (kg): 86.689 Volume (m³): 3.109 Origin: Europe