Livorno 4-seater velvet sofa in light beige (Bluvel 22), 260x104 cm

104cm x 260cm x 82cm (length x width x height)

Collection: Livorno Color: Light beige Material: Velvet Fabric: Bluvel 22 Abrasion resistance (Martindale): 100,000 Fabric composition: This is a synthetic fabric that imitates velvet with a delicate sheen. The perfect choice for elegant furniture designs. It possesses very good abrasion resistance, which significantly reduces the risk of damage (Martindale test 50,000, 320 g/m²). The material is extremely soft and feels silky to the touch. The fabric has passed the cigarette test, meaning the upholstery system is resistant to smoldering and ignition and meets the standard PN-EN 1021-1:2014-12. Care instructions: Furniture upholstered with velvet fabric should be cleaned every one to two weeks. Gently brush the fabric in one direction using a soft brush or sponge. This removes dust and dirt without letting it penetrate deeper into the fabric. Brushing also raises the pile and prevents the so-called "crushing" effect, i.e., the flattening of fibers in areas where you sit or lean most often. The velvet upholstery should be thoroughly refreshed 1–2 times a year. Gently wipe the entire fabric with a damp solution of a neutral detergent, e.g., dish soap mixed with water. Afterwards, wipe with a clean, damp sponge or cloth to remove any detergent residue. Allow the fabric to air dry. You can also use special upholstery cleaners for fabrics, e.g., foam, shampoo, or spray. Follow the manufacturer's instructions when doing so. For stains or spills, carefully blot the liquid with a dry cloth or paper towel. To remove dirt from mud, ketchup, mayonnaise, yogurt, or lipstick, gently lift the remains of the substance. To clean the sofa, use mild, neutral detergents such as dish soap or mild soap mixed with lukewarm water in a ratio of one teaspoon of detergent to two cups of water. Strong cleaners and bleach can damage the upholstery. To avoid this, test the cleaning agent on an inconspicuous area of the furniture and wait 15 minutes. Vacuum the fabric gently before wet cleaning to remove surface dirt so that it does not penetrate deeper into the material. Clean the soiled area slowly and gently using circular motions from the outer edge of the stain toward the center, attempting to loosen the dirt between the fibers. Avoid vigorous and heavy rubbing so as not to damage the velvet pile. Repeat the cleaning process if necessary, expanding the cleaned area around the stain. Apply the cleaning solution in thin layers and remove excess solution immediately. If too much cleaning solution seeps into the fabric, it may become stiff. After cleaning, wipe the treated area thoroughly with a clean, damp cloth to remove the cleaning solution and avoid water rings. Do not use hot water to remove stains, especially organic ones, as this can set the stains. After removing the stain, let the fabric air dry at room temperature. Do not use a hairdryer or any other direct heat source. Do not sit on the sofa during this time, as the upholstery may become deformed. Seat upholstery: Polyurethane foam 30 kg/m³ + wadding 200 g/m² Back upholstery: 70% silicone, 30% foam Structure / Components: Frame made of solid pine, chipboard, fiberboard, plywood, springs, black plastic legs Color (legs): Black plastic Material (legs): Plastic Number of legs: 8 Height of legs (cm): 2.5 Leg assembly: Legs pre-assembled Number of seats: 4 Length (cm): 260 Width (cm): 104 Height (cm): 82 Seat width (cm): 200 Seat depth (cm): 68 Seat height (cm): 43 Backrest height (cm): 38 Armrest width (cm): 29 Armrest height (cm): 59 Maximum load (kg): 450 Weight (kg): 79.495 Volume (m³): 2.217 Origin: Europe