Orta 3-seater corner sofa, right-hand, with pull-out sleeper function, in light beige velvet (Bluvel 22), 215x151 cm

151cm x 215cm x 82cm (length x width x height)

Collection: Orta Color: Light beige Material: Velvet Fabric: Bluvel 22 Abrasion resistance (Martindale): 100,000 Fabric composition: This is a synthetic fabric that mimics velvet with a delicate sheen. The perfect choice for elegant furniture designs. It has excellent abrasion resistance, which significantly reduces the risk of damage (Martindale test 50,000, 320 g/m²). The material is extremely soft and feels silky to the touch. The fabric has passed the cigarette test, meaning the upholstery system is resistant to smoldering and ignition, meeting the PN-EN 1021-1:2014-12 standard. Care instructions: Furniture upholstered in velvet should be cleaned every one to two weeks. Gently brush the fabric in one direction using a soft brush or sponge. This removes dust and dirt without driving it deeper into the fabric. Brushing also raises the pile and prevents the so-called "crushing" effect, i.e., the flattening of fibers in areas where you sit or lean most often. The velvet cover should be thoroughly refreshed 1–2 times a year. Gently wipe the entire fabric with a damp solution of a neutral detergent, such as dish soap and water. Afterwards, wipe with a clean, damp sponge or cloth to remove any detergent residue. Allow the fabric to air dry. You can also use special upholstery cleaners for fabrics, such as foam, shampoo, or spray. Always follow the manufacturer's instructions. In case of stains or spilled liquids, gently blot the liquid with a dry cloth or paper towel. To remove dirt from mud, ketchup, mayonnaise, yogurt, or lipstick, carefully pick up the remains of the substance. To clean the sofa, use mild, neutral detergents such as dish soap or mild soap mixed with lukewarm water in a ratio of one teaspoon of detergent per two cups of water. Strong cleaners and bleach can damage the cover. To avoid this, test the cleaner on an inconspicuous area of the furniture and wait 15 minutes. Vacuum the fabric gently before wet cleaning to remove surface dirt so it does not penetrate deeper into the material. Clean the soiled area slowly and gently using circular motions from the outer edge of the stain toward the center, attempting to loosen the dirt between the fibers. Avoid vigorous and heavy rubbing to prevent damaging the velvet pile. Repeat the cleaning process if necessary, gradually increasing the cleaned area around the stain. Apply the cleaning solution in thin layers and remove excess solution immediately. If too much cleaning solution seeps into the fabric, it can become hard. After cleaning, wipe the treated area thoroughly with a clean, damp cloth to remove the cleaning solution and avoid water marks. Do not use hot water to remove stains, especially organic ones, as this can cause the stains to set. Allow the fabric to air dry at room temperature after removing the stain. Do not use a hairdryer or any other direct heat source. Do not sit on the sofa during this time, as the cover may lose its shape. Seat upholstery: Polyurethane foam 30 kg/m³ + batting 120 g/m² Back upholstery: 70% silicone, 30% foam Structure / Components: Solid pine wood frame, chipboard, fiberboard, plywood, springs, black plastic feet Color (legs): Black plastic Material (legs): Plastic Number of legs: 10 Leg height (cm): 3 Leg assembly: Feet assembled Number of seats: 3 Length (cm): 215 Width (cm): 151 Height (cm): 82 Seat width (cm): 199 Seat depth (cm): 65 Seat height (cm): 40 Backrest height (cm): 42 Armrest width (cm): 8 Armrest height (cm): 57 Maximum load (kg): 350 Weight (kg): 100.311 Volume (m³): 2.662 Origin: Europe