Collection: Ida
Color: Dark brown
Material: Velvet
Fabric: Bluvel 48
Abrasion resistance (Martindale): 100000
Fabric composition: Bluvel is a fabric with silky softness and a subtle sheen, perfectly reflecting luxurious velvet. It is characterized by its durability and lends interiors a refined elegance.
Shading effect: The longer pile changes with the light and gives furniture a three-dimensional depth.
Exceptional durability: 100,000 rubs in the Martindale test guarantee the highest resistance to abrasion and damage.
Cozy softness: The sensual velvet feels soft and invites relaxation.
Care instructions: Furniture upholstered with velvet fabric should be cleaned every one to two weeks. Brush the fabric gently in one direction with a soft brush or sponge. This removes dust and dirt without allowing them to penetrate deeper into the fabric. Brushing also aligns the pile and prevents the so-called "crushing" effect, i.e., the flattening of the fibers in areas where you sit or lean most often.
Once or twice a year, the velvet upholstery should be thoroughly refreshed. Gently wipe the entire fabric with a damp solution of a neutral cleaning agent, e.g., dish soap with water. Then wipe with a clean, damp sponge or cloth to remove cleaning agent residues. Let the fabric air dry.
You can also use special upholstery cleaners for fabrics, e.g., foam, shampoo, or spray. In this case, follow the manufacturer's instructions.
In case of stains or spilled liquids, blot the liquid carefully with a dry cloth or paper towel. To remove dirt from mud, ketchup, mayonnaise, yogurt, or lipstick, carefully pick up the residue of the substance.
Use mild, neutral cleaning agents such as dish soap or mild soap mixed with lukewarm water to clean the sofa, at a ratio of one teaspoon of cleaning agent to two cups of water. Strong cleaners and bleach can damage the upholstery. To avoid this, test the cleaning agent on an inconspicuous area of the furniture and wait 15 minutes.
Vacuum the fabric carefully before wet cleaning to remove surface dirt so that it does not penetrate deeper into the material.
Clean the soiled area slowly and gently with circular motions from the outer edge of the stain toward the center and try to loosen the dirt from between the fibers.
Avoid vigorous and hard rubbing so as not to damage the velvet pile.
Repeat the cleaning process if necessary, increasing the cleaned area around the stain.
Apply the cleaning solution in thin layers and remove excess solution immediately. If too much cleaning solution soaks into the fabric, it can become hard.
After cleaning, wipe the treated area thoroughly with a clean, damp cloth to remove the cleaning solution and prevent water rings.
Do not use hot water to remove stains, especially organic ones, as the stains may become permanently set.
Let the fabric air dry at room temperature after removing the stain. Do not use a hairdryer or any other direct heat source. Do not sit on the sofa during this time, as the upholstery may become deformed.
Seat padding: Polyurethane foam 30 kg/m³ + padding 300 g/m²
Back padding: Back cushion – 100% foam flakes
Structure / Components: Solid pine wood frame, particleboard, fiberboard, plywood, springs, black plastic legs
Color (legs): Black plastic
Material (legs): Plastic
Number of legs: 12
Leg height (cm): 3.5
Leg assembly: Legs pre-installed
Number of seats: 3
Length (cm): 231
Width (cm): 152
Height (cm): 77
Seat width (cm): 185
Seat depth (cm): 60
Seat height (cm): 43
Backrest height (cm): 36
Armrest width (cm): 23
Armrest height (cm): 65
Maximum load (kg): 350
Weight (kg): 79
Volume (m³): 2.704
Origin: Europe