Moso 3-Seater Velvet Sofa in Light Beige (Bluvel 22), 190x95 cm

95cm x 190cm x 85cm (length x width x height)

Collection: Moso Color: Light beige Material: Velvet Fabric: Bluvel 22 Abrasion resistance (Martindale): 100,000 Fabric composition: This is a synthetic fabric that imitates velvet with a delicate sheen. The perfect choice for elegant furniture designs. It has a very good abrasion resistance, which significantly reduces the risk of damage (Martindale test 50,000, 320 g/m²). The material is extremely soft and feels silky to the touch. The fabric has passed the cigarette test, meaning the upholstery system is resistant to smoldering and ignition and meets the standard PN-EN 1021-1:2014-12. Care instructions: Furniture upholstered with velvet fabric should be cleaned every one to two weeks. Gently brush the fabric in one direction using a soft brush or sponge. This removes dust and dirt without allowing them to penetrate deeper into the fabric. Brushing also raises the pile and prevents the so-called "crushing" effect, i.e., the flattening of fibers in areas where you sit or lean most often. The velvet cover should be thoroughly refreshed 1–2 times a year. Gently wipe the entire fabric with a damp solution of a neutral detergent, e.g., dish soap and water. Then, wipe with a clean, damp sponge or cloth to remove any detergent residue. Allow the fabric to air dry. You can also use special upholstery cleaners for fabrics, such as foam, shampoo, or spray. Be sure to follow the manufacturer's instructions. For stains or spills, gently blot the liquid with a dry cloth or paper towel. To remove dirt from mud, ketchup, mayonnaise, yogurt, or lipstick, carefully lift off the residue of the substance. To clean the sofa, use mild, neutral detergents such as dish soap or mild soap mixed with lukewarm water in a ratio of one teaspoon of detergent to two cups of water. Strong cleaners and bleach can damage the cover. To avoid this, test the cleaner on an inconspicuous area of the furniture and wait 15 minutes. Vacuum the fabric gently before wet cleaning to remove surface dirt, so that it does not penetrate deeper into the material. Clean the soiled area slowly and gently using circular motions from the outer edge of the stain toward the center, attempting to loosen the dirt from between the fibers. Avoid vigorous and heavy rubbing to prevent damage to the velvet pile. Repeat the cleaning process if necessary, gradually expanding the cleaned area around the stain. Apply the cleaning solution in thin layers and remove any excess solution immediately. If too much cleaning solution soaks into the fabric, it may become stiff. After cleaning, thoroughly wipe the treated area with a clean, damp cloth to remove the cleaning solution and avoid water rings. Do not use hot water to remove stains, especially organic ones, as this can cause the stains to set. After removing the stain, allow the fabric to air dry at room temperature. Do not use a hairdryer or any other direct heat source. Do not sit on the sofa during this time, as the cover may lose its shape. Seat upholstery: Polyurethane foam 30 kg/m³ + batting 300 g/m² Back upholstery: Back cushion – 100% foam flakes Structure / Components: Frame made of solid pine wood, particle board, fiberboard, plywood, springs, black plastic feet Color (legs): Black plastic Material (legs): Plastic Number of legs: 8 Leg height (cm): 3.5 Leg assembly: Feet assembled Number of seats: 3 Length (cm): 190 Width (cm): 95 Height (cm): 85 Seat width (cm): 150 Seat depth (cm): 62 Seat height (cm): 42 Backrest height (cm): 43 Armrest width (cm): 19 Armrest height (cm): 68 Maximum load (kg): 350 Weight (kg): 56.8 Volume (m³): 1.534 Origin: Europe