Ravello 3-seater sofa with sleeper function, fold-out, made of textured fabric in light beige (Baltimore Sand), 202x110 cm

110cm x 202cm x 89cm (length x width x height)

Collection: Ravello Color: Beige Material: Velvet Fabric: Salvador 1 Abrasion resistance (Martindale): 100,000 Fabric composition: Beautiful, luxurious fabric with a subtle sheen and short pile. The material is thick and belongs to the velour category. It feels very pleasant to the touch and is also highly abrasion-resistant (Martindale test 100,000 and 440 g/m²). The LiquidBlocked technology used in the fabric makes it difficult for liquids to be absorbed – the liquid collects on the surface of the material without penetrating deep into the fibers. This allows spilled coffee, tea, or wine to be removed within seconds using a slightly absorbent cloth or paper towel. The fabric has passed the cigarette test, meaning the upholstery system is resistant to smoldering and ignition, meeting the PN-EN 1021-1:2014-12 standard. Care instructions: Furniture upholstered with velvet fabric should be cleaned every one to two weeks. Gently brush the fabric in one direction using a soft brush or sponge. This removes dust and dirt without pushing them deeper into the fabric. Brushing also lifts the pile and prevents the so-called "crushing" effect, which is the flattening of fibers in areas where you sit or lean most frequently. The velvet cover should be thoroughly refreshed 1–2 times a year. Gently wipe the entire fabric with a damp solution of a neutral detergent, e.g., dish soap and water. Follow up by wiping with a clean, damp sponge or cloth to remove any detergent residue. Allow the fabric to air dry. You can also use specialized upholstery cleaners for fabrics, such as foam, shampoo, or spray. Follow the manufacturer's instructions when doing so. In case of stains or spills, gently dab the liquid with a dry cloth or paper towel. To remove dirt from mud, ketchup, mayonnaise, yogurt, or lipstick, carefully lift the remains of the substance. Use mild, neutral detergents such as dish soap or mild soap mixed with lukewarm water (ratio of one teaspoon of detergent to two cups of water) to clean the sofa. Strong cleaners and bleach can damage the cover. To avoid this, test the detergent on an inconspicuous area of the furniture and wait 15 minutes. Gently vacuum the fabric before wet cleaning to remove surface dirt so it does not penetrate deeper into the material. Clean the soiled area slowly and gently using circular motions from the outer edge of the stain toward the center, attempting to loosen the dirt from between the fibers. Avoid vigorous and heavy scrubbing to prevent damaging the velvet pile. Repeat the cleaning process if necessary, increasing the cleaned area around the stain. Apply the cleaning solution in thin layers and remove excess solution immediately. If too much cleaning solution seeps into the fabric, it can become stiff. After cleaning, thoroughly wipe the treated area with a clean, damp cloth to remove the cleaning solution and prevent water spots. Do not use hot water to remove stains, especially organic ones, as this can set the stains. After removing the stain, allow the fabric to air dry at room temperature. Do not use a hairdryer or any other direct heat source. Do not sit on the sofa during this time, as the cover may deform. Seat upholstery: Polyurethane foam 30 kg/m³ + wadding 200 g/m² Back upholstery: 100% mixed foam Structure / Components: Frame made of solid pine, chipboard, fiberboard, plywood, springs, black plastic legs Color (legs): Black plastic Material (legs): Plastic Number of legs: 6 Leg height (cm): 2.5 Leg assembly: Legs pre-assembled Number of seats: 3 Length (cm): 202 Width (cm): 110 Height (cm): 89 Seat width (cm): 200 Seat depth (cm): 66 Seat height (cm): 41 Backrest height (cm): 49 Maximum load (kg): 350 Weight (kg): 75 Volume (m³): 1.978 Origin: Europe